The gasifier is composed of barrels, purification devices, pipes, stoves and other parts. Biomass fuel passes through the gas chamber, and under the condition of airtight and lack of oxygen, a flammable gas is produced by dry distillation, pyrolysis and chemical oxidation reaction, and the ideal combustion effect is achieved under the support of nitrogen and the combustion of oxygen. Vacuum carburizing and quenching process of 15CINi4MoA steel cross shaftThe stove device system itself has the functions of biomass raw material gas generation, gas purification and automatic separation. When the fuel is put into the barrel to react to produce combustible gases such as carbon monoxide, hydrogen, methane, propane, etc., the gas is automatically introduced into the separation system through the purification device to carry out the procedures of purifying tar, purifying soot, and purifying water vapor, thereby producing high-quality gas, which is transported to the The infrared stove burns very completely; and the inner refractory layer is designed with a special liner to ensure the service life of more than ten years.H13 steel mold vacuum heat treatment High efficiency and energy saving: without adding any chemical raw materials, the combustible materials such as straw are directly converted into gas, with high calorific value and good combustion effect, and the application of infrared combustion technology can obtain a higher furnace surface temperature (nearly 1000 degrees Celsius). Since infrared light itself can carry energy, it does not need air as a transmission medium, and has strong penetrating ability. Therefore, the thermal efficiency is greatly improved, and the heating time of the object is shortened, thereby making the heating faster and more efficient. And shorten the kitchen labor time, reduce fatigue. If you like to stir-fry with high heat, choose an infrared gasifier, the effect is better!Vacuum Carburizing Process of 20CrMnTi Steel
top of page
bottom of page